WhatsApp/WeChat:
+86 18994470782
+86 18994319892
E-mail:
laserhy@126.com
Jeanyjin@laserhy.com
Address:
Building 14, No.399 Gongtang Road, Luzhi Town, Wuzhong District, Suzhou, Jiangsu, CHINA (215127)
Characteristics:
Optical fiber laser engraving has lower cost, higher flexibility, environmental protection, compare with the traditional method, such as mechanical engraving, chemical corrosion, screen printing, ink printing, etc.
1. Non-contact marking: Laser marking is processed to non-mechanical "knife". It can mark any regular or irregular graph. And no internal stress produced during the marking, to protect the accuracy of the work-piece. No corrosion, no "tool" wear, no poison, no pollution. It’s also easy to control and operate by the computer system.
2.Excellent beam quality: small focusing spot, and better processing quality.
3.Low using cost: Power consumption is about 500W, and no consumables.
4.Low stop rate: lifetime of laser source is up to 100,000 hours.
5. Anti-fake: The typical characteristic is to make permanent mark with the laser beam. And the mark is not easy to imitate and change.
Model | HY-MFB01 |
Average output power | 20W/30W/50W/60W/100W/200W |
Laser wavelength | 1.06µm |
Laser frequency | 20-80kh or 50-100khz |
Standard engraving area | 110mm*110mm |
Optional engraving area | 70mm*70mm/800mm*800mm |
Min. Letter | 0.2mm |
Engraving depth | <=0.3mm |
Engraving line speed | <=7000mm/s |
Minimum line width | 0.01mm |
Repeatability | ±0.002mm |
Power supply | 220V/50Hz/60Hz |
Total Power consumption | 500W |
Samples:
Official account
Official account
Hayi Laser 
English
