How to grasp the use skills of fiber laser cutting machine? When using fiber laser cutting machine to process objects, it is necessary to grasp some use skills of fiber laser cutting machine equipment, so as to give better play to the efficiency of the equipment and maximize the working efficiency of the equipment. Let's take a look at the detailed introduction:
　1) Always check the steel belt and make sure it is tight. Otherwise, if something goes wrong in the operation, people may be injured and even die. The steel belt looks like a small thing, and the problem is still a little serious.

2) Check the straightness of the track and the verticality of the machine every six months, and timely maintain and debug if abnormal. Without this, the cutting effect may not be very good, and the error will increase, affecting the cutting quality. This is the top priority and must be done.

3) Once a week, use a vacuum cleaner to absorb the dust and dirt in the machine, and all electrical cabinets should be closed to prevent dust.

4) Each guide rail should be cleaned frequently to remove dust and other debris to ensure the normal operation of the equipment. The rack should be wiped frequently and lubricated to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately, and the quality of the cut products will be improved.

5) The double focal length laser cutting head is a vulnerable item on the laser cutting machine, and its long-term use leads to the damage of the laser cutting head.

　　Check and repair regularly. In case of deformation or other forms, you should know that the laser cutting head has been damaged and needs to be replaced. Without replacement, the cutting quality will be affected and the cost will be increased. Some products may have to be processed again to reduce the production efficiency. The laser cutting head should be produced by a professional manufacturer, and it should be carefully checked when purchasing, so as to avoid problems when using it at that time.

When the laser cutting machine is in use, the cutting head will walk according to the set cutting path, but under the conditions of different materials, different thicknesses and different cutting methods, the height of the laser cutting head needs to be adjusted and controlled. The distance between the cutting nozzle and the surface of the cutting workpiece is one of the main factors that determine the cutting quality and cutting speed. In addition to selecting the appropriate cutting nozzle model and air pressure parameters according to the cutting situation, the height between the cutting head and the steel plate needs to be increased or decreased according to the thickness of the cutting material. Steel plates with different thickness use different parameters. At the same time, the cutting nozzle should be adjusted to the corresponding height.

During the use of metal laser cutting machine, in order to ensure high-quality incision, the height from the cutting nozzle to the surface of the workpiece to be cut must be basically the same. Due to the fast speed of the laser cutting machine, the operator can't see it with his eyes and adjust it by hand. The reaction speed is definitely not achieved. Especially when cutting thin plates, or there are lines on the material surface, the flatness is not high, or the cutting processing environment is limited, it is very important to keep the cutting height stable.

In order to make up for the unstable height control during manual adjustment cutting, the metal laser cutting machine is equipped with an imported follow-up capacitor height adjuster. No matter how thick the plate is cut, with the capacitor, the height can be kept consistent with the follow-up cutting head. The principle of capacitance adjustment is that the capacitance between the capacitance induction ring and the steel plate to be cut forms the capacitance between two plates, and the capacitance is related to the distance between them.